• WAP手机版 加入收藏  设为首页
希捷硬盘数据恢复

希捷常用命令与希捷F3缺陷表分析

时间:2016-2-23 10:36:05   作者:管理员   来源:本站原创   阅读:10051   评论:0
内容摘要:V1:用户区slip list ,相当于P表(V10)和非常驻缺陷表(V40)的合集;V4:Alt list ,俗称为A表,属于替换表,包含已决部分和未决部分。V8: servo flaws list wV10 : P表,主缺陷表,为03模块,一般为出厂生成,恢复数据必须的模块。...
V1:用户区slip list ,相当于P表(V10)和非常驻缺陷表(V40)的合集;
V4:Alt list ,俗称为A表,属于替换表,包含已决部分和决部分
V8: servo flaws list w
V10 : P表,主缺陷表,为03模块,一般为出厂生成,恢复数据必须的模块。在系统文件和模块中有指向。
V20: primary servo flaws 
V40:非常驻G表,容易导致希捷前好后坏的故障,在系统文件中有指向。
V80:常驻G表,为A表已决的部分,G转P的时候会被加入P表。
V100:编译器中生效的P表。

F3,A1   Alt (直接替换)
F3,B1   Pending Sec  (先不替换,设为未决,实际上都是加入Alt表)

规则:
1.G转P的时候,[V80:常驻G表] 也就是已决部分才会转入,[V40:非常驻G表]也会转入,但是未决的条目不转入,直接被清除;
   G转P:增长缺陷表转到主缺陷表。
2.做编译器再生时,勾选“处理增长缺陷表”,[V80:常驻G表] 也就是已决部分,还有V4里面的未决部分,也就是整个V4都会转入非常驻G表。


指令详解:
Display Defect Lists (Level T 'V')




  Description:
    This command displays any combination of the user slip list, the system slip list, the
    servo flaws list, and the reassigned sectors table.


  Quick Help:


    "DisplayDefectLists, V[DefectListSelect],[Hd],[StartCyl],[NumCyls],[DisplaySummaryOpt]";


  Input Parameters:


    0 - Bit Select.
    
        This input specifies the bit select for the display:
    
          If bit 0 is set, the user track slip list will be displayed.  If bit 15 is also
          set, the entries will be displayed by index instead of cylinder/head.
    
          If bit 1 is set, the reserved track slip list will be displayed. If bit 15 is also
          set, the entries will be displayed by index instead of cylinder/head.
        
          If bit 2 is set (4), the alt list will be displayed.
    
          If bit 3 is set (8), the servo flaws list will be displayed.
    
          If bit 4 is set (10), the primary defect list ( PLIST ) will be displayed.  This
          list holds raw defect position information obtain during drive processing.
    
          If bit 5 is set (20), the primary servo flaws list will be displayed.
    
          If bit 6 is set (40), the nonresident G List will be displayed.  This PBA based list
          combines the previous nonresident G List with the resident G List at the time of the
          last format.
    
          If bit 7 is set (80), the resident G List will be displayed.  This PBA based list
          holds bad spares and defects found since the last format.  This list includes all
          bad PBAs found since format.  It will have more than one entry for a reallocated
          reallocation, for example.
    
          If bit 8 is set (100), the primary DST list will be displayed.  This list holds
          the defect position information from the PLIST (above) expressed as sector
          positions instead of SFI.
    
          If bit 15 is set, the user track slip list and the system track slip list will
          be displayed by entry index and entry count instead of cylinder range.
    
          Note: bits may be combined to display more than one list.
    
    
          Type:    Unsigned 16-bit value
    
          Range:   0 to 0xFFFF
    
          Default: 0001
    
    1 - Chosen Head.
    
        If this input is entered then defects will display only for the specified head.
        If this input is not entered then defects for all heads will be displayed.
        If bit 15 is set in parameter zero ( Bit Select ), this parameter is ignored.
    
    
          Type:    Unsigned 32-bit value
    
          Range:   0 to 0xFFFFFFFF
    
          Default: None (display all heads)
    
    2 - Start Element
    
       For the user track slip list and reserve track slip list,
         If bit 15 of parameter 0 (above) is set, Start Element is the index of the
         first element to be displayed.
    
         If bit 15 of parameter 0 (above) is clear, Start Element is the first cylinder
         of entries to be displayed.
    
       For the servo flaws list and primary servo flaws list, Start Element is the first
       cylinder of entries to be displayed.
    
       For the P List, Start Element is the first cylinder of entries to be displayed.
    
       For the G List Resident and GList Nonresident, Start Element is the lowest PBA of
       entries to be displayed.
    
    
          Type:    Unsigned 32-bit value
    
          Range:   0 to 0xFFFFFFFF  This value is not range checked and the user
                                    must use discretion selecting input values.
    
          Default: 0
    
    3 - Element Count
    
       For the user track slip list and reserve track slip list,
         If bit 15 of parameter 0 (above) is set, Element Count is the number of
         list entries to display.
    
         If bit 15 of parameter 0 (above) is clear, Element Count is the number of list
         elements to display.
    
       For the servo flaws list and primary servo flaws list, Element Count is the number
       of cylinders of entries to be displayed.
    
       For the P List, Element Count is the number of cylinders of entries to be displayed.
    
       For the G List Resident and GList Nonresident, Element Count is the number of PBAs of
       entries to be displayed.
    
    
          Type:    Unsigned 32-bit value
    
          Range:   0 to 0xFFFFFFFF
    
          Default: 0
    
    4 - Display Summary
    
        If set to 99, this input causes a parser - friendly list summary to be
        displayed after all other output.  Works with V4 only.
    
    
          Type:    Unsigned 32-bit value
    
          Range:   0 to 0xFFFFFFFF
    
          Default: None
    


  Output Data:


    If an error occurred, the following information will be displayed.
    
          "DiagError aaaaaaaa "
    
       where
    
          aaaaaaaa is the Diagnostic Error Code
    


    
    Slips Output Fields:
    
    LBA - LBA of first good sector AFTER slipped section
    
    Span - Length in sectors of slip
    
    Cumm - Cummulative length of all slips up to and including this slip
    
    Log cyl, hd, sctr, zn, phys cyl, phys sctr - These indicate the location of
          the first sector after slip. This address matches the LBA listed
          in the first column.  Note that physical head will equal the logical
          head.
    
    SFI - Symbols from index of the first sector after the slip.  The SFI corresponds
          to the LBA listed in the first column
    
    Slips Sample:
                                                                             
    F3 T>V8001,,10,6
      90EB43      2     11   881  1    D2   0    881    D4     5A52   90EB54
      90FB09      1     12   882  1   7FA   0    882   7FB     590E   90FB1B
      910230      1     13   883  1   682   0    883   683     59C6   910243
      910956      1     14   884  1   509   0    884   50A     5882   91096A
      91107D      1     15   885  1   391   0    885   392     5956   911092
      9117A4      1     16   886  1   219   0    886   21A     5A0E   9117BA
                                                                             
    Head 0: entries    22E        slips     1BBE
    Head 1: entries    187        slips      3B5
      Total Entries    3B5  Total Slips     1F73
                                                                             
    F3 T>V1,,881,6
     User Slip Defect List
                             log log   log     phys   phys
        LBA    span   cumm   cyl  hd  sctr zn   cyl   sctr     SFI      PBA
      90EB43      2     11   881  1    D2   0    881    D4     5A52   90EB54
      90FB09      1     12   882  1   7FA   0    882   7FB     590E   90FB1B
      910230      1     13   883  1   682   0    883   683     59C6   910243
      910956      1     14   884  1   509   0    884   50A     5882   91096A
      91107D      1     15   885  1   391   0    885   392     5956   911092
      9117A4      1     16   886  1   219   0    886   21A     5A0E   9117BA
                                                                             
    Head 0: entries    22E        slips     1BBE
    Head 1: entries    187        slips      3B5
      Total Entries    3B5  Total Slips     1F73
    
    Note that no header is displayed.
    
    F3 T>V2,0
     System Slip Defect List
                            log log   log      phys   phys
        LBA    span   cumm   cyl  hd  sctr zn   cyl   sctr     SFI
           0      0      0     0  0     0   0  24884     0 FFFFFFFF
       16688    268    268    96  0     0   1  2491A     0 FFFFFFFF
    
    Head 0: entries      2        slips      268
      Total Entries      2  Total Slips      268
    
    Note that SFI is not currently supported for the system area.


    F3 T>V4
    Reassigned Sectors List
    Original     New    log log   log     phy   phy
        LBA      PBA    cyl  hd  sctr zn  cyl   sctr     SFI
      7CD51F   7CD574    863  1   22C  0   863   22C    51F40     BBM
      7E89B0   7E8A05    87F  1   6E9  0   87F   6E9    14A6C     BBM
      8465B0   84662A    8E0  0   31A  0   8E0   31A    205CE     BBM
     36BA8AC  6B46255  -----  - -----  1  7343   1C5          ALT
     415B13A  6B46257  -----  - -----  1  7343   1C7          ALT
     4682DC6  4690DFC   4BD9  0   382  1  4BD9   382     950E     BBM
     980E2FA  A0911D4  -----  - -----  2  AE46   1E8          ALT
    10EC8C97 1359A486  -----  - -----  7 16368   18E          ALT
    14D8E9CF 1689E9C0  -----  - -----  9 1A9DF   10E          ALT
    159F54DE 1689E9BF  -----  - -----  9 1A9DF   10D          ALT
    16E84BE4 17E41B07  -----  - -----  A 1C9D8   139          ALT
    17DEECCE 196C0D2D  -----  - -----  B 1EFD9   153          ALT
    1858833F 1860FF31  1D5F2  0   20F  B 1D5F2   20F    744C8     BBM
    19E066FC 19E97E01  1FC8F  1   42B  C 1FC8F   42B    2AE93     BBM
    
             Alt   Pending  Total    Alted  Total
           Entries Entries Entries    Alts   Alts
    Head 0              3
    Head 1              3
    Total       8       6       E        3      B
    Checksum = E964
    
     The drive does not keep information about where an alt came from.
     Therefore LLLCHS and SFI are not available for slips, and the
     physical cylinder and physical sector refer to the new location in
     the spares.
    
    
     Possible flags in rightmost columns:
     ALT        sector has been reassigned
     BBM        sector is marked as untrustworthy (bad block mark)
     no write   sector is marked as should not be written
     no read    sector is makred as should not be read
     reported   (only with reallocation time stamping)
                sector has been reported to host
    
     The display summary option works as follows:
    F3 T>V4,,,,99
     Total Alt Entries:    0
     Total Alts of Alts:    0
     Total Alts:    0
     Total Pendings:   52
     Total Entries:   52


    F3 T>V8
      Servo Flaws List
      log    log    phy
     head    cyl    cyl   wedge status
        2  8AA0  8AA0   C3   primary + deallocd
        2  A542  A542   C2   primary + deallocd
        2  A542  A542   C4   primary + deallocd
        2  A54A  A54A   2B   primary + deallocd
        3 15B28 15B28   34   primary + deallocd
        3 17057 17057   FD   primary + deallocd
        3 1BBED 1BBED   1C   primary + deallocd
        3 1BBED 1BBED   2F   primary + deallocd
        3 1C6CB 1C6CB   28   primary + deallocd
        3 1C6CB 1C6CB   2A   primary + deallocd
        3 25159 25159   B3   primary + deallocd
     Log head 0: entries        0
     Log head 1: entries        0
     Log head 2: entries        4
     Log head 3: entries        7
           Total Entries        B


    F3 T>V10
     P List
      log   log    phy length
     head   cyl    cyl in symb  SFI  flags
       0   1A4D   1A4D   4B    8A2D1  2 TA
       1   1A4E   1A4E   49    8A2D1  1 servo
       0   1A4F   1A4F   4A    8A2D1  0
       1   1A50   1A50   4A    8A2D1  0
       1   1A51   1A51   48    8A2D1  0
       1   1A52   1A52   4B    8A2D1  0
       1   1A53   1A53   4B    8A2D1  0
    Head 0 Entries:   2
    Head 1 Entries:   5
      Total Entries:   7


    F3 T>V20
     Primary Servo Flaws List
      log   log    phy
     head   cyl    cyl wedge
       2   8AA0   8AA0   C3
       2   A542   A542   C2
       2   A542   A542   C4
       2   A54A   A54A   2B
       3  15B28  15B28   34
       3  17057  17057   FD
       3  1BBED  1BBED   1C
       3  1BBED  1BBED   2F
       3  1C6CB  1C6CB   28
       3  1C6CB  1C6CB   2A
       3  25159  25159   B3
    Head 0 Entries: 0
    Head 1 Entries: 0
    Head 2 Entries: 4
    Head 3 Entries: 7
     Total Entries: B


    F3 T>V40,0,0,20
    Nonresident GList                   5 entries returned
    Total entries available: 5
        PBA    Len  Flags  Phy Cyl Hd  PhySctr    SFI
           0    1      0        0   0      1      1F7
          3F    1      0        0   0     41     8164
        5290   19      0        9   0    36D   1032CD
       119C2    2      0       20   0     21    83B66
    1D48B830    1      0    201FD   0    591    7B12B
    
    Flags:
      RESERVED                1  This bit is reserved for internal use.
      POST_FORMAT_DEFECT      2  If set, this is a Post Format defect.
      DEFECTIVE_SPARE         4  If set, this is a defective spare.
      GROWN_TO_PRIMARY_LIST   8  If set, this defect came from a Glist to Plist merge.
    


  Revision History:


    0001.0000   Initial revision.
    0002.0000   Correct headers to servo flaws list and primary servo flaws list.
    0003.0000   Improve spacing of G List output.
    0004.0000   Make GLists (V40, V80) and primary DST list ( V100) default to displaying
                whole list.
    0011.0000   Combined the PSG Diagnostic Error Codes (PSGDEC) and the Diagnostic External
                Test Service Error Codes (DETSEC) into a single set of Diagnostic Error Codes

                (DiagError).

标签:primary 编译器 用户 
相关评论
不良信息举报中心成都网警网警110报警服务AAA级互联网行业信用360网站安全检测

数据恢复QQ交流群:378664983    站长QQ:958754010


蜀ICP备14015947号-2